Plumbing question

[banditpowdercoat]

Originally Posted by Myka

Maybe I'm not being clear about what I mean, or maybe you're wrong.

We use say 1200 psi to go through a 5/8" hose then through a 1/8" fitting on the end (we use this on Hydro-Vac trucks to cut the ground), and voila! It will cut your toes off. If we use 1200 psi pumped through a 3" hose (which you would never be able to hang onto, and you'd need a muuuuuuuch bigger pump to get 1200 psi out the end of a 3" hose), and you wouldn't hurt your toes with it.

So...slap your fancy words (pressure, head pressure, velocity, psi, flow, whateeeever) on that equation, and tell me what the heck you mean that I am wrong.

But were not changing the pump. What would your 1200PSI pump out out with a open 4" hose, No nozzle. I guarantee you it wont be 1200PSI. But it still woould take your toes and whole feet off if it was exiting the hose at 1200PSI

I'm not acctually sure where this is going anymore, but head pressure is irrelavent of the volume, its height. Thats the main reason why our tank glass gets thicker the higher the tank gets. Higher water, more pressure. Regardless of vessel size. Just like pressure in the Ocean at 15ft below, is the same as in a pool at 15' below. Head pressure has nothing to do with flow or anything. Its just the weight of a column of water.