So I checked again and the tank is actually not sloping forward like I thought. Its actually level when I place the level both in the tank on the bottom glass and on the top rim. When I had checked the stand, I had the level in the foam top and thought the stand or floor was sloping 1/4" from back to front. Not sure what to think of this.
The tank is about 1/8" off from right to left though, so I am just going to use the wood wedge type shims to deal with that. I figure they should be fine since its only 1/8".
|
02-16-2009, 05:14 AM
Threaded Mode
