Did the 3 filters before the membrane fill? If not, disconnect the line out of the filter at the intake of the membrane. Of course you will shut off the water first. Wait for the water to come out of the hose, and reconnect.
If there is water in those filters, then disconnect after the ro membrane. See if water comes out there. Follow the lines, until you get to the point where the water does not come out and that is where the problem is.
Of course you know that if you have a 100 gpd (gal per day) membrane, then you only get about 5 gal per hour, so it does come out slow.
I have a tank that the water goes into all day long until it is full and then it shuts down
|
02-12-2009, 12:58 AM
Threaded Mode
