|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
02-12-2009, 12:49 AM
|
|||||
|
|||||
I use a single pre-filter and then an RO/DI 5 stage unit. You will more than likely have to use a booster pump as most well set-ups run a holding tank that switches on the main pump when it hits 40 psi and builds up pressure till 60 psi. The booster pump will run at about 80 psi to help the RO unit be the most efficient and give better life for the filters. Check on E-Bay and you should find everything for around $350 - $400 range (seeing out dollar really sucks right now)
__________________
Mike 150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made. Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms. 
|
|
#2
02-12-2009, 01:30 AM
|
|||||
|
|||||
|
You should go take a look over at BulkReefSupply.com (CanReef Sponsor). They have everything and then some to get you setup with the best RO/DI unit money can buy
__________________
28g Nano Cube drilled with 13g sump in stock stand. Vertex IN80 Skimmer, Phosban 150 Reactor, Apex Controller, DIY LED with stock hood, dimmable Established March 2006
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
