Who has a grounding probe in their tank?

[hillegom]

So if you have a GFI, then you do not need a grounding probe?

[Norstar]

A couple of dumb questions.

1. Should you have a probe in both the sump and the aquarium?
2. Can you not make your own ground probe with a piece of insulated copper or aluminum wire?

[fkshiu]

Never used one. Never needed one. If you've got "stray voltage", then fix the equipment that is causing it. Further, a GFCI will save your life, a ground probe will not.

[Doug]

As I posted, why not use both. I would never run with no GFI, but I do on occasion have something run to another plug for whatever reason. In my particular situation, no probe, arc to my forehead, probe in, no problems.

As for fixing the pump, thats all fine and dandy, once you know its screwed and leaking current.

[heyfredyourhat]

There is a decent size thread about ground probes being very dangerous on RC.

My 2 cents...I have one in my sump, i have a gfi as well. The other nite hands were in the tank and i got a good jolt and then gfi tripped. It was my light, and about a year ago i was shocked by the same light and didnt have a gfi installed. Talk about being electrocuted!! Especially when one arm is all the way to the bottom of a 24" tank!!!

Not sure what the ground probe does, or if its worthwhile, but i know i love my gfi now!!

[Canadian]

The general consensus is that if you run a ground probe you MUST also run a GFCI otherwise you are actually putting yourself at GREATER risk by having a ground probe without a GFCI because nothing will trip to shut down the offending electrical component should it actually be leaking current (to you for example).

Also, the fish don't get zapped. They aren't grounded. The idea that stray current somehow causes HLLE has generally been dismissed as nonsense over the last few years.

Do a search on RC - this has been debated ad nauseum and when people who actually know what they are talking about (I'm certainly not one of them) get involved in the conversation the take home message becomes the same - if you run a grounding probe you must also run a GFCI for your safety.

[digital-audiophile]

That is an intersting point that the fish are not grounded. I never thought about that, I always assumed that if I saw fish floating belly up I would know not to stick my hands in.

I really need to get a GFCI. I need to find someone in Calgary that can do it for me.

[mike31154]

Originally Posted by Norstar

A couple of dumb questions.

1. Should you have a probe in both the sump and the aquarium?
2. Can you not make your own ground probe with a piece of insulated copper or aluminum wire?

1. Depends on your set up. Technically the water flows continuously between the sump and display, so only one should be required if you decide to install one at all. Once water stops flowing, you've opened the 'circuit' so to speak. But that usually happens during a power outage or when you turn off the return pump so no electricity is present.

2. You can make your own, but insulating it with plastic will defeat the purpose. You'll need to get hold of a non corroding metal such as stainless steel or better yet titanium.

[digital-audiophile]

I found the GFCI at Cdn tire. It was $26. Much easier for a guy like me to hook up than rewiring an outlet

[mike31154]

I have one of these. Great product, only beef is the spring loaded outlet covers make it tricky to plug in timers etc.