Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 02-04-2009, 11:50 PM
xtreme xtreme is offline
Member
 
Join Date: Feb 2008
Location: Calgary
Posts: 772
xtreme is on a distinguished road
Default

Quote:
Originally Posted by Rbacchiega View Post
good idea with the sponge in the sump Xtreme...never thought of that. Now if only I still ran a qt tank....
This way works well because you can keep the QT dry and store it away if you want to when it's not in use. I always make sure I have mixed saltwater on hand so if I decide to buy something unexpectedly I can use tank water for the QT and top the display back up with my mixed water. You even get a water change out of the way with this method.
Reply With Quote
  #2  
Old 02-05-2009, 05:03 PM
agent77's Avatar
agent77 agent77 is offline
Junior Member
 
Join Date: Jan 2009
Location: chilliwack
Posts: 16
agent77 is on a distinguished road
Default

Quote:
Originally Posted by xtreme View Post
This way works well because you can keep the QT dry and store it away if you want to when it's not in use. I always make sure I have mixed saltwater on hand so if I decide to buy something unexpectedly I can use tank water for the QT and top the display back up with my mixed water. You even get a water change out of the way with this method.
Sounds brilliant , thanks for all the help .
Reply With Quote
  #3  
Old 02-05-2009, 10:15 PM
mark's Avatar
mark mark is offline
Member
 
Join Date: Nov 2002
Location: Edmonton AB
Posts: 4,212
mark is on a distinguished road
Default

Having run a bare QT, amazed how fast the NH3 can build. Though I still keep a sponge in the sump for a HOB filter if I decide to go that route again a lot of caution is needed. Must frequently check your NH3 levels and have lots of water made up for quick changes.

What I've used since is my LR and macro refugium. I'm able to isolate it from the display so all I've done is add a heater and skimmer. As it's already running, it's cycled and should be able to maintain a few fish without problems, plus with the LR etc, it's a less stressful environment.

If the fish has problems with something then I make the decision to setup a hospital tank (move over the skimmer and heater, add the HOB but bare with PVC fittings) or leave in the fuge. From there I then would decide how to handle the fuge before placing back on-line (chuck the LR and macro and sterilize or just run fallow for a while).
Reply With Quote
  #4  
Old 02-06-2009, 05:56 PM
BCOrchidGuy BCOrchidGuy is offline
Member
 
Join Date: Dec 2002
Location: Coquitlam, BC
Posts: 2,172
BCOrchidGuy is on a distinguished road
Default

If you make up some water before you add any fish to the QT tank you can store the water in CLEAN used milk jugs (the 4l ones). Sponge filter is awsome, to get the cycle going just use a couple gallons of water from your main system when you do a water change. Instant cycle. For QT remember to have seperate stuff for that tank, never use nets, filters, water etc from the QT tank and always feed, treat, gaze and generally admire your main tank before you do the QT tank and once QT is cared for, wash up like crazy.

QT tank should never be used for anything else once it has had any meds given, silicone can hold traces of meds and leak them back into newly made up water. Oh and one more thing, QT for fish shouldn't be used for corals, have a seperate QT for corals if you need to, and the fish QT doesn't need light, room light will be sufficient.

Douglas
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 12:25 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.