|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#21
05-14-2003, 10:06 AM
|
|||||
|
|||||
 Hi Steve,Tests went real well, this thing shoots like a fire hose. Have already started to put another couple of Rats together. Nice thing is not to have to worry about any O-Rings or internal leaks.  Van 
__________________
\"It\'s not junk, it\'s un-assembled DIY\" 
|
|
#22
05-14-2003, 06:27 PM
|
|||||
|
|||||
|
And when are they going to be available to us thrify reef-keepers?
__________________
Cheers, Andrew B.
|
|
#24
05-17-2003, 12:49 AM
|
|||||
|
|||||
|
After fiddling in the garage again last weekend I built a Rat with the outlet assembly on the left-hand side of the unit. Actually looks pretty neat! This I figured would allow me to put the unit in the front left-hand corner of my tank and it would still be effective since the jet-nozzle would be far enough away from the glass to avoid it hitting. Enter the friend.... "Hey, why don't you build one with two nozzles that rotate opposite to each other so they cover an area of 180 degrees...?" Is this something that appeals to you folks? 180 degree sweep Rats? Van
__________________
\"It\'s not junk, it\'s un-assembled DIY\"
|
|
#25
05-17-2003, 12:52 AM
|
|||||
|
|||||
|
Heeeyy,
Now yer thinkin'!  Christy 
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#26
05-18-2003, 04:38 PM
|
|||||
|
|||||
|
Sounds appealing to me..........
If you get around to making 1" ones....Put me down for two. 
__________________
Confucious say : Things that come to those who wait, will be things left over by those who didnt.
|
|
#27
05-19-2003, 02:55 AM
|
|||||
|
|||||
|
Fudge, Sounds neat eh? It'll be 1" for sure, the only thing I'm wondering about is whether I should use a single feed pipe with an external Tee feeding the 2 outlet nozzles.  Or perhaps 2 separate feed pipes for 2 pumps!  This may be the only way to jam all that stuff in the same casing I use on all my Rats.This just gave me another idea  , get back to you on this soon!Van
__________________
\"It\'s not junk, it\'s un-assembled DIY\"
|
|
#28
05-19-2003, 07:39 AM
|
|||||
|
|||||
|
Quote:
This would be preferable for me anyways,keep me updated. Thx,
__________________
Confucious say : Things that come to those who wait, will be things left over by those who didnt.
|
|
#29
07-05-2003, 10:03 PM
|
|||||
|
|||||
|
Hello Everyone, I have accumulated in quantity all the materials required to provide the DIY challenged and those who can't be bothered to build, ReefRat 1.0"'s. please leave a PM and we'll see if we can put a couple of these little rodents on your system.  Van
__________________
\"It\'s not junk, it\'s un-assembled DIY\"
|
|
#30
07-24-2003, 03:47 PM
|
|||||
|
|||||
Just a little update so you can see the improved ReefRat  Rats ready for a new home  Mounting hardware in place  Interchangeable Jet-Nozzle in place  Bottom View fully assembled  Mounted Rat - Side View  Mounted Rat - Offset View  Rat at play  Rat at play Van
__________________
\"It\'s not junk, it\'s un-assembled DIY\"
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
