Ghl Profilux Discussion And Support Thread

[Slick Fork]

I've had mine (Ph and Temp) in the water since June 2007, still working fine

[Aqua-Digital]

Temp should last a very long time.

pH probes should be chaged annually, some prefer to wait until the fail. personally choice but the industry standard for "any" pH probe is 1 year

[shark bait]

I am trying to setup the PC software for the Profilux Plus II I just got....
I maybe missing a step or doing something wrong... any help would be appreciated. What I have done so far is as follows:

1) Downloaded and installed ProfiLuxControl II, Version 4.0.5.0 from http://aquariumcomputer.com/System__.../download.html.

2) Started the software and hit connect. This gave me the error message "The connected Profilux has too low firmware stand (<4.00) and can't be operated with this version or ProfiluxControl! Please use ProfiluxControl 3.0.8.1!"

3) Uninstalled version 4.0.5.0

4) Downloaded and started install of ProfiLuxControl II, Version 3.0.8.1 however the language is not English. An image of the first screen I get is attached. I have no idea how to proceed.

Since step 4 I have repeated steps 1 and two with version 4.0.4.0 as the site indicates 4.0.5.0 is Beta - I'm not sure if Beta is with reference to the Control software or the Firmware or both...None the less I got the same results as I did with Version 4.0.5.0.

Any help would be appreciated.

[Aqua-Digital]

once connected using V3.08 go to the top of the software screen on the top left you will see 3 words, click the middle one which will mean in English extras

Click on Sprache and then select Engliche

Press save and load, you may need to also exit the software afterwards

In V4.0 upwards language selection is done on install.

[shark bait]

Thanks for the quick reply ... version 4.0.4.0 is up and running.

[Aqua-Digital]

when you get the SMS unit ( ) you can then upgrade to V4.05