Why the hell do my sps keep dying

[Powertec]

Originally Posted by martym

I still say if you go to the Zeovit.com web site and say that your Alk is 10, they will tell you to get it down to NSW readings. It has to do with the way the bacteria work in the zeo system.

I agree with this theory as we'll. I kept my dkh when i was running Zeo at 7.That could be a issue.

What is the TDS coming out of your R/O?

[Snappy]

You say they die from the bottom up. How quickly? Is it RTN or STN? In my experience if corals are dying from the bottom up they are either getting too little flow or too little light or both. I can assure you that in a 75 gallon tank you are not even close to the flow you need for sps with your current power heads. IMO those KH1's are barely enough for a 20 gal nano. As an example I have 2 sieo 820's & a Tunze nano stream (1200 gal hour) in a 40 gal frag tank.
It's a big jump going from a FOWLR or Soft coral reef to sps because the requirements are very different and flow & lighting are key in keeping sps healthy.
Also what brand of salt do you use? Have you tested the new water mix and if so what is it at?

[JDigital]

Originally Posted by Snappy

I can assure you that in a 75 gallon tank you are not even close to the flow you need for sps

What do you recommend for flow in a 75G for SPS Greg? I am getting about 44X turnover (3300GPH) in my 75...

[marie]

To put the flow thing into perspective I have a maxijet 1200 with the mod kit on my 65g (same footprint as the 75g but only 18" high) so thats approx. 1600 gph flow on a tank that has my tube anemones, bubble coral, fox coral and mushrooms, all low flow corals.
If I was going to have sps in there I would add at least another modded maxijet.

[martym]

in my 50g I have a return pump =350gph, 2 6055 nano's and a MJ1200 total of 3515gph or 70X turn over

[Doug]

SPS dont need a reason to not make it, just being sps is a reason.

Ok, I agree pics would help, esp. giving the acro experts here a look see. I dont agree salinity is a problem, although I would never keep my sps reef at anything under 1.024 -1.025

Magnesium is important with those corals. And its relationship to calcium. If your depending on water changes with IO to keep it up, and unless something has changed, it has low magnesium. I always use IO, but add calcium and magnesium, following Ben,s {chemmaster} formula. Mag. always stays at around 1350 this way.

I would also run a lot more current in an sps based aquarium of that size. My 90 is just softies now and I still run two large Hydors, {1200gph}, two large powerfilters and a Tunze 6080, rated @ 2200gph.

[dabandit]

Ok my mistake i run koralia 4's at 1200gph each and my return pump is a 1200gph magdrive combined with my nano im making around 3800gph this isnt enough? my nano is directlly infront of my last acro colony. I talked to the place where I last got my corals their salinity is 1.024 where mine was 1.023 so I doubt thats the issue. The bulbs in my system are around 7 months old and getting dim, I run them about 8'' above my 18'' deep tank. About the salinity....I use two hydrometers which give the exact same reading every time,you wouldnt trust that?

[Haloreef]

I would agree with Snappy. I would go one step further and say good flow is an absolute must but, a random flow is realy what you should be looking for. Do the polyps on your sps sway back and forth, or are they always being pushed in one direction? I get mezmorized watching the polys in my sps tank swaying back and forth.
Keith.

[Snappy]

Originally Posted by JDigital

What do you recommend for flow in a 75G for SPS Greg? I am getting about 44X turnover (3300GPH) in my 75...

50 - 100% more.

Ok bought a new cam battery here is a picture of my last acro colony. 12hrs ago this beauty was perfect I awoke today to find this,notice how the polyps are still fully extended

In my experience when you get a green skeleton after STN / RTN you have a nitrate-phosphate issue.

[dabandit]

I'll test again ty,i've been testing at 0 i run 2 phosbans one with carbon one with phosphate media. Maybe my test is off can anyone recomend a more accurate version? P.S this is the first death where the skelly went green all others were white