Fauna Marin BALLING LIGHT discussion thread

[Aqua-Digital]

Instruction:

You need three solutions in three separate 10-liter (2,5 gallons) containers:

1. can:
2 kilogram Calcium Chloride-Dihydrate in 5 liter reverse-osmosis water

2. can:
2 kilogram Magnesium Chloride-Hexahydrate in 5 liter reverse-osmosis water
250 gram Magnesium Sulfate-Heptahydrate

3. can:
500 gram sodium hydrogen carbonate in 5 liter reverse-osmosis water
Now, all three cans can be connected to a GHL ProfiLux dosing station with built in controller or if you have a ProfiLux computer then just the 3 station doser.

Each solution has to be dosed according to the size of the tank. At the beginning, CA, MG and alkalinity have to be checked daily.and the dosing quantity has to be adjusted at the controller. The ProfiLux dosing station controller is very suitable for that, as each channel can be adjusted individually and the solutions can be dosed twice a day at 5 minutes intervals.
You can do this also by hand.

After two weeks, ones personal need will be detected and adjusted. The quantities in each can can now be calculated and varied by you. Through Balling-light a small quantity of sodium chloride will arise in your tank.

To avoid accumulation it should be compensated by periodical water change
(10% each week). Also, always check the salinity of your water and adjust it if necessary. Essential trace elements needed for the growth of corals can be dosed automatically. Therefore we have developed the Ultra Trace B solutions. Add to can 1 (to the Calcium Chloride-Dihydrate) 25ml of the strontiumcomplex and 25ml of the heavy-metall-complex. To can 2 (to the magnesium) you add 25ml of the Iodine-Fluorine Complex.

And that is it.

We look forward to your questions