KrazyKuch's & Michika's 180Gal Tank Build

[michika]

Thanks guys!

So some somewhat big changes; I gave Kevin the go ahead to put a SMALL hole in the wall behind the tank. The room behind the tank is our "utility" room/storage/water making place. Over the next couple of weeks we are going to convert it to a water making place/ fish storage/dehumidifyer/ozonizer/misc. fish equipment storage aka a semi fish-room. We are also going to be making a few changes to how our top off is done, and possible even top off from the utility room.

The RKE is now running;
- top off pump
- kalk stirrer
- ozonizer
- skimmer
- ORP/ pH/ Temp probes

To add on;
- chiller
- heaters

We will need another power bar to do the lights. I am quite pleased though that we have not encountered any errors that I have seen in the DA forums. I still want to be able to sit down the play with the controller myself, as I have yet to do that, but things are seeming to be pretty intuitive, and the instruction manual is helping out.

The sump WILL be built either this weekend, or early next week. We finally have a space to build and dry the sump. The sump is what is holding up the remaining projects; skinning the tank, doing the final returns, and creating the storage shelving.

As well the beads in the ozonizer are exhausted already. The system was brought online on Sunday and they are needing a re-charge already. Melev from RC thinks its because of the high humidity where the ozonizer is located (under the stand).