Nevin's 14G + 5.5G sump

[Nevin]

Thanks Anthony. I'm leaning toward 300GPH rather than 200. Looks like I'll probably run the pump submerged. See return pump thread:

http://www.canreef.com/vbulletin/sho...922#post321922

Sounds like the Mag pumps aren't as bulletproof as I thought, so I might just go for something cheaper. Quietone 1200 would work if I can buy one locally (could get 3 of them for the price of a Mag 3 at drsfostersmith if it weren't for the shipping, taxes, waiting for delivery, etc.) or a Rio 1100.

The plumbing is starting to come together. Some pics:





The flex tubing is a waterproof electrical conduit called Liquidtight (about $0.90/ft at Home Depot). Has anyone here used it? Doesn't say anything on it about antibacterial agents added.

Anyone have suggestions on the plumbing before I break out the glue?

Regards,
Nevin

[Nevin]

Slow progress on modifying the stand as I've been obsessed with plumbing. The bowfront poses an interesting woodworking challenge. My first attempt is basically diy plywood--laminating together strips of oak veneer around a curve. Looks like I'll need 6+ plies to get it thick enough. I'm laminating the first 3 plies today to see how it looks.

Picture:



Hope it works!

[mark]

Looks good.

See why you where thinking about running the pump external with a 175W.

[GreenSpottedPuffer]

I have used mag pumps for returns as well as Quiet One pumps and I personally prefer the Quiet One pumps. They may not last as long as a MAG but are way cheaper, quieter and give off much less heat. I would prefer to replace it every two years than use a MAG pump again. Thats just my experience though.

[Nevin]

GreenSpottedPuffer,

That's good to hear as I was leaning toward the Quietone 1200 as a cheaper option. Do you know where to get them locally?

Thanks,
Nevin

[mseepman]

J&L sells Quiet One's. Not sure about the 1200 but I just bought a 3000 two weeks ago there.

[Nevin]

Not on their website--just the bigger Quietones. Anyone know where to get the 1200 in the Lower Mainland? Sorry if this is a duplicate post--first one didn't show up.

Regards,
Nevin