![]() |
|
#1
|
|||||
|
|||||
![]() What do ppl here recommend for a sump? I was thinking a 75 gallon or something. That would be 1.5 feet wide and 4 long. Think i could fit that in there through a 2.5 foot opening given the stand's front to back width of 2.5 feet?
I think I need to rig a cardboard tank and test that one out lol... |
#2
|
|||||
|
|||||
![]() So I decided to play it safe and moved the support to the middle. I also added a bit of support to both middles. I should still be able to fit a 72 gallon inside I think.
![]() ![]() |
#3
|
||||
|
||||
![]() Probably a good idea on the center brace. Your sump will just have to be a little taller to make up for the length that you can't get in there.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#4
|
|||||
|
|||||
![]() I believe that you screwed the plywood ends on? Maybe you could just unscrew the plywood from one end and slide the sump right in from one end. Then just screw the ply back in place.
__________________
400 gal reef. Established April, 2007. 3 Sequence Dart, RM12-4 skimmer, 2 x OM4Ways, Yellow Tang, Maroon Clown (pair), Blonde Naso Tang, Vlamingi Tang, Foxface Rabbit, Unicorn Tang, 2 Pakistani Butterflies and a few coral gobies My Tank: http://www.canreef.com/vbulletin/showthread.php?t=28436 |
#5
|
||||
|
||||
![]() maybe have a door on the side so you could put a sump in that way
|
#6
|
||||
|
||||
![]() hey untamed your idea wasnt there when I posted my idea,I swear ,I swear
but a door can be used more than once .If ya like |
#7
|
|||||
|
|||||
![]() How about a door on EACH end to make both of you happy?
The sides are screwed and glued. I doubt I could remove them at this point. I'd prefer to only be able to use a sump I can fully remove later if need be. Not sure the need would ever arise but like you said I can go with a taller one. I should have plenty of room as I don't think I'll run a refuge. I have a feeling that any useful fuge needs to be bigger than what I have space for in there. I had considered placing one on a shelf in the stand. I do have a lot of height to play with. The innner height of the stand is more than 3 feet! Last edited by lastlight; 04-29-2008 at 05:58 AM. |
#8
|
||||
|
||||
![]() Don't discount the benefit of a fuge. As for size...how is it that CPR can sell a hang on fuge (not big at all) if size/volume is so important? The important part is for the nutrient export and for the opportunity for pods to safely reproduce.
This is just my opinion but I know my numbers got better when I added my small fuge with my sump.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#9
|
|||||
|
|||||
![]() Tagging along, looks promising and for sure a good tank journal!
Stanley, |
#10
|
||||
|
||||
![]() just a noob giving his two cents worth but if your wanting to be able to remove the sumps for some reason why don't you run two connected with a 2 inch pipe for leveling purposes that's what i did and i have a refugium in one sump and in the other i have the mixing chamber and the protein skimmer chamber and i still have room for a 22 watt lifeguard UV sterilizer on the end
|
![]() |
Thread Tools | |
Display Modes | |
|
|