Thanks for the replys guys.
Van, you lost me a bit talking about teflon tape on barbed fittings.
Quote:
|
For the barbed fittings 4-10 wraps of Teflon Tape evenly across the threads will seal them well. Enough so that with a little pressure the threads don't press through right away. I usually thread about half way so their is teflon tape still uncompressed on the threads
|
If the outleft from my standpipe (threaded male connector sticking out underneath my tank about 1" long) needs to be connected to the vinyly hose, do I wrap the threaded connector with the teflon tape first?
03-04-2003, 02:15 PM
Threaded Mode
