PH Monitoring

[Aquattro]

I used to have pH problems all the time, until the day I threw my meter away. Everything has been fine since. I find the important thing is healthy fish and corals, not a value on a meter. Regular water changes, and routine tests of Ca and Alk keeps everything stable, I don't feel pH is a required parameter unless something is visibly out of whack.

[mark]

Don't routinely monitor pH either but something maybe to keep an eye on if starting up a Ca reactor.

[wetcoast]

When I'm not working - my 3rd monitor is acting as a HUD for all my reef parameters that I monitor with my controller. If I don't run a calcium reactor, My pH stays fairly "regular". When there are windows open in the house, it shoots up to 8.2 as you can see. It's a bit obsessive, but like I said, something to look at when not working.

[jasond]

I rarely check mine. I do have a one of those hand held electronic testers, and if I am feeling ambitious I will take a look. It is usually around 8.1/8.2. When I get a controller I imagine I will keep a closer eye on it, but otherwise I have no reason as everything seems to be healthy.

[michika]

I wish there was an option to choose both. I test both in the morning and the evening once a week. I see very little swing in my pH if any since my refugium runs on a reverse photo period. I generally see 8.1 for all readings, maybe 8.0.

[Borderjumper]

Originally Posted by Aquattro

I used to have pH problems all the time, until the day I threw my meter away. Everything has been fine since. I find the important thing is healthy fish and corals, not a value on a meter. Regular water changes, and routine tests of Ca and Alk keeps everything stable, I don't feel pH is a required parameter unless something is visibly out of whack.

LOL I did the same thing, and it really did solve my problem! My tanks like to run at 7.8. No matter how much I bump up my PH with chemicals it is always down to 7.8 the next day. Soooooo I dont check it anymore and its all good!

[christyf5]

Originally Posted by Aquattro

I used to have pH problems all the time, until the day I threw my meter away. Everything has been fine since. I find the important thing is healthy fish and corals, not a value on a meter. Regular water changes, and routine tests of Ca and Alk keeps everything stable, I don't feel pH is a required parameter unless something is visibly out of whack.

I'm with Brad on this one. My Aquatronica measures pH all the time. When I first got it I freaked out some about it because it never goes above 7.6. The tank seems fine so I just ignore it (plus no matter what I try it always goes back to 7.6).

[untamed]

Anyone who answered the poll as "it never changes" has probably not measured it accurately enough to see what is actually happening. There is a 24 cycle based on the lighting and it is VERY unusual to find a way to hold pH steady throughout the 24hrs.

Here's a challenge...someone show me a 24hr graph with hourly readings of their tank pH that stays flat.

As for what to do about it. As mentioned, the answer is "don't worry about it".

[Jason McK]

I do not monitor my Tank PH but do monitor my Effluent of my CA Reactor

J

[Joe Reefer]

The answer is "not at all" as in I dont check it.