![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() I am new to reefing and have been studying now for 4 weeks getting all the info i can gain. What I am lacking in experience i am hoping to make up for with knowledge with your help in this thread, I will post some pictures as they come available, the tank arrives from Sea star on Tuesday and live rock will be in from Jakarta later in the week. I already have a 100 gallon tank going but its in poor shape. I have set up a 100 gallon tub with skimmer to prepare the water for curing the rock when it arrives I will just do frequent water changes till the ammonia spike is over I am hoping the die off will be small as the rock will be received with in 32 hours of it being shipped, please share with me your experiance as things progress.
Last edited by JoelV; 03-24-2008 at 04:26 AM. |
#2
|
|||||
|
|||||
![]() Hi Joel,
Welcome to Canreef I will move this to the main reef forum. You can also start your own tank build thread in the Tank Journal forum, if you wish.
__________________
Doug |
#3
|
|||||
|
|||||
![]() congrats on the tank and congrats on becoming a member on a amazing board. Our family welcomes you....
![]()
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#4
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#5
|
||||
|
||||
![]() Im setting it up in our Victoria location,we already have a 100 gallon running, for others intrested in stopping by please refer to our website for the address.
Last edited by JoelV; 12-10-2007 at 12:13 AM. |
#6
|
||||
|
||||
![]() So here it is a 76 x 24 x 25 built buy H20 Aquarium.(Formely Sea star). I mapped out on paper how I'm going to set up the feed and the drains went and bought all the fittings and thats as far as I got today, Here is also a pic of our 100 gallon that we transfered down from our Nanaimo location it suffered global warming( chiller not turned on) on its first day in Victoria, the only thing that survived was the Marron Clown fish, hermit crabs and all the stuff living in the sand, it got up to 96 degrees when we came in the next day. We stabilized the tank and added in some new fish and some frags. the Coraline that all turned white is coming back real good now and its only been 4 weeks. I welcome any questions and advice. I'm hoping not to make to many mistakes setting up the new tank but some times its the only way I can learn anything. Cost of education can sometimes be high.
![]() ![]() ![]() Last edited by JoelV; 12-12-2007 at 02:05 AM. |
#7
|
|||||
|
|||||
![]() The first thing you have to do is unhook that canister filter and give it to me for my fresh water tank
![]() Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#8
|
||||
|
||||
![]() Today, I removed the sump and drove it back over to H20 Aquarium>I Had them increase the size of the pump intake hole to 1.5 inch to better accommodate the sequence dart Pump. They did it free of charge, even though it was my fault for not specifying the size,(thanks guys!)I also had to take a trip back to the Irrigation place to change over some fittings, changed my mind a bit on the plumbing.
I had a customer today who had to have my Protein skimmer, so I sold it ![]() ![]() |
#9
|
|||||
|
|||||
![]() Lots of potential with that baby
__________________
![]() Greg |
#10
|
||||
|
||||
![]() Today I finished plumbing the drains I used spa flex on the drain ends so I can easy access them for putting on filter bags. I started the manifold for the supply, it will accommodate loc-line outlets. I am coming out of the pump at 1 1/2 inch's and then going though a Y fitting and into two 1
inch spa flex into the manifold then 3/4 lockline outlets. thats it till Monday. ![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|