Looking for help, or someone to hire to build a sump and help set up

[marciemp]

The area under the tank is where we want our sump. It will for a max of 32 by 12, and the height is 28 inches. If the sump were to be shorter it could also be wider. The stand and tank is a corner unit, like 1/4 of a pie or circle, and it curves across the font so the longer the sump gets the narrower it has to be. We would like to buy an in sump skimmer too. Right now we don't have anything else we need to run, as I am pretty new at this but I guess we would like the option of reactors, and we would probably like an ATO for fresh water in there too. We measured and if there was a 32" 12 sump there is still quite a bit of room under there. The stand inside is a right angle triangle with the 2 sides coming out from the corner measuring 32" each, and then it is about 45" across the front. Thanks for any help,
Marcie

p.s. I am leaning towards NOT drilling the tank, and using an overflow instead.