![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() I'm considering a euro reef skimmer for my 80 gallon tank - does anyone have any experience with these?
Do they work well Easy to use and set Should I be considering something different in the same price range? thanks for your thoughts. Josh
__________________
24 Gallon NanoCube: Stock 72 watt PC lighting |
#2
|
|||||
|
|||||
![]() I have a Euro-reef 180 on one of my tanks, and on one of the others I have an H&S.....I prefer the Euro-reef hands down over the H&S. It's easier to clean, use etc etc....one of my favorites that's for sure! I'd love to have the space to put one on my 65g too but I just don't.
__________________
No act of kindness, no matter how small, is ever wasted. Sarah |
#3
|
|||||
|
|||||
![]() I bought mine 8 months ago it works great. The Breakin period took like 3 weeks but after that was finished, I have to empty the thick sludge once a week. It is easy to clean and easy to adjust. Hope this helps.
I think mine is the RS80 I have it one my 32gal. |
#4
|
||||
|
||||
![]() I also have the RS80 and I'm very happy with it.
I got mine on Ebay for $189.00 US.....which right now is even better. Took about a week to get here...roughly |
#5
|
|||||
|
|||||
![]() I had an RS135. My only skimmer experience otherwise is my new aqua-c remora HOB skimmer which is very different. I liked the euro-reef skimmer a lot. It pulled a lot of junk out of the water consistently.
__________________
Everything I put in my tank is fully dependant on me. |
#6
|
|||||
|
|||||
![]() Agreed, mine was great.
__________________
Brad |
#7
|
||||
|
||||
![]() I have had a CS-6-2+ for years and I will not buy a Euro-Reef again.
The good points are: it does a fairly decent job of skimming. The collection cup is easy to detach for skimming. The bad points are: 1. The pump is noisy. Euro-Reef could have spent a bit more money and used Eheim pumps, they didn't. 2. The riser pipe becomes impossible to adjust after a while. You need to make a gate valve mod or the skimmer will not be adjustable. It is a hassle and expense to get the parts and build a gate valve mod. Euro-Reef could have included the gate valve on the output for about $10.00 more but they chose not to. 3. The customer service attitude is the worst. My skimmer shipped without an O-ring between the collection cup and the neck of the skimmer. I didn't notice this for the first couple of months because the union fit snug if I tightened it enough, and their instructions did not mention any O-ring. Later when I found out I was missing the O-ring I asked Euro-Reef to send me one and thre treated me as if I were a criminal trying to scam them. Fortunately J & L came through and sent me a free O-ring. For the above reasons, but mostly reason #3, I won't buy any more Euro-Reef products. From all the skimmer reviews I have read, I would chose ASM if cost was a factor, Barr Aquatics/Austin Oceans if quality was the main factor. |
#8
|
||||
|
||||
![]() I have owned an
- Aqua-medic - prism - Asm - Deltec I own a ER CR 6-3 and a ER 5-3 and when I purchase a new skimmer it will be a Euro-Reef. I agree that my 6 year old ER 5-3's pump makes a small noise, but it works perfect. When I want to upgrade that skimmer that is on my 33g reef I will buy a eheim pump as nothing else is needed. They are super easy to clean and setup and since I don't have much height in my sump area it is nice not to need space above the cup to take out and clean. Kevin |
#9
|
||||
|
||||
![]() I have a ER RS250 on my heavily stocked 210g mixed reef & it does a great job. Fills up my collection cup with super thick foam and smelly sludge (1/4 of the cup in one day). Couldn't be happier.
Have an ASM G4+ on my 120g fowlr with 90g seahorse/frag/sump tank and it does a decent job. |
#10
|
|||||
|
|||||
![]() i just bought 2 rs250's and im impressed with quality but a little annoyed with the air valve plugging almost all the time, i havnt really tryed to do anything about the problem except clean the stupid things out all the time
__________________
but what the heck do i know |
![]() |
Thread Tools | |
Display Modes | |
|
|