|
|
|
|
|
#1
11-14-2007, 02:08 PM
|
|||||
|
|||||
I use the Goetech. Yes it has a valve to control flow
J 
|
|
#2
11-14-2007, 03:50 PM
|
|||||
|
|||||
|
I use the Goetech. Yes it has a valve to control flow. I ran it about 1/2 open for the first cycle. Some people put it on a timer and run it 3 hours on then 3 hours off. If you follow this plan ensure that the ZEOlites are continually covered in water. They should not be exposed to air and allowed to dry out.
Tom R
|
|
#3
11-15-2007, 03:18 AM
|
|||||
|
|||||
|
Jason and Tom:
Just for my clarification are you using the GroTech Zeolith filter ZF110/150 below?  I can't see any value to control flow thru the filter! Where did you get your zeofiliters?
__________________
300 gal starphire custom built in pentagon reef (+90 gal sump on Blue Line 100 HD return pump, 210lb LR, Euro-Reef RC250 skimmer, 2x400W MH, 2x28W compacts, 2xTurbelle classic 4002 pumps & Turbelle Stream 6100 on 7095 Multicontroller, running ZEOvit) Livestock Fish: damsels; sailfin, yellow, regal & naso tangs; ocellaris & tomato clowns; lyretail anthias; foxface lo; flame angelfish corals: a few
|
|
#4
11-15-2007, 03:37 AM
|
|||||
|
|||||
|
I got my reactor from Hidden Reef. I bought a starter kit for $350. The kit came with the large reactor. It holds 3 litre of ZEOlites.
http://www.hiddenreef.ca/storefront/...&categoryid=56 Tom R
|
|
#5
11-15-2007, 04:01 AM
|
|||||
|
|||||
|
Tom
Does your Zeolithfilter filter look exactly like the picture on my last post? You mention decreasing the flow initially but I don't see a valve on the unit.
__________________
300 gal starphire custom built in pentagon reef (+90 gal sump on Blue Line 100 HD return pump, 210lb LR, Euro-Reef RC250 skimmer, 2x400W MH, 2x28W compacts, 2xTurbelle classic 4002 pumps & Turbelle Stream 6100 on 7095 Multicontroller, running ZEOvit) Livestock Fish: damsels; sailfin, yellow, regal & naso tangs; ocellaris & tomato clowns; lyretail anthias; foxface lo; flame angelfish corals: a few
|
|
#6
11-15-2007, 04:57 AM
|
|||||
|
|||||
|
The reactor is the same as this. It has a valve that can adjust the flow.
http://www.zeovitusa.com/mm5/merchan..._Code=External Tom R
|
|
#7
11-15-2007, 06:02 AM
|
|||||
|
|||||
|
that is also the same as mine (the link in Tom's post) the ball valve is on the true union just above the pump. It is not shown in the pic.
J
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
