|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#601
10-09-2007, 12:33 AM
|
|||||
|
|||||
If you contact GHL via www.ghl-kl.de they will put you in touch with your nearest stockist to your location and country.
Good luck in your search, and please come back here for as much technical help and support with your new GHL Welcome the the forum and the GHL thread. 
|
|
#603
10-11-2007, 05:16 AM
|
||||
|
||||
|
Not yet in the current firmware version BUT we will have a new 2 + 2 independent pump mode in one of the next firmware versions!
Then it is possible to control a wavebox with high frequency and other current pumps with "slow waves"
|
|
#604
10-13-2007, 04:37 AM
|
|||||
|
|||||
|
Just got my profilux today, with a USB card. I am having trouble connecting, I have set the conncection to USB and the interface to the com port specified in the device manager, and then searched for the device address only to have it tell me 'No Device found!'. I have installed the drivers and the program. The device manager recognizes the controller, but the program will not connect. Any ideas?
__________________
My Tank: 135G display, 45G Sump, 20G top off. 2 x 400 W, Bullet 1.5, Snapper Return, Profilux. ------------------------------------------------------------------------------------------------------ My Photo Website
|
|
#605
10-13-2007, 06:09 AM
|
|||||
|
|||||
|
Figured it out. Changed the USB card to another port. Not sure if the first port is no good, or it was just a bad connection. The Card came installed in the profilux.
__________________
My Tank: 135G display, 45G Sump, 20G top off. 2 x 400 W, Bullet 1.5, Snapper Return, Profilux. ------------------------------------------------------------------------------------------------------ My Photo Website
|
|
#606
10-13-2007, 01:32 PM
|
|||||
|
|||||
|
Hiya
The port is good, you just did it the long way round, what you needed to do was find what port that the devise was sitting on and then match that to the profiLux. Next to the connection tab there are three small dots, if you click on this that takes you into the devise manager. This is one of the most common questions we get so dont worry, all part of the ProfiLux learning curve and why i am here (and others) to help out. The cards are installed so you dont have to fiddle around opening the box up as soon as you get it. Sort of a pre delivery set up service. You will also see the latest firmware has been uploaded also. When i get 5 minutes I will list on here the most common newbie FAQ's which should help out, especially with the run up to Christmas. Glad you got it nice and quick! REgards Michael Last edited by Aqua-Digital; 10-13-2007 at 01:39 PM.
|
|
#607
10-13-2007, 06:44 PM
|
||||
|
||||
|
Can someone tell me the web site to download the new firmware and manuel in English please and thank you
__________________
To the whole world you may be one person but to one person you may be the whole world (15  0 Gal reef) profilux ll controller, 2GHL LED strips, 2 Hamilton 250 W MH, 5-2' 65w T-5's, 2 6100 Tunze's, RC 135 Euro Reef skim, dual chamber Calcium reactor, marine tech kalkwasser reactor and now zeovit
|
|
#608
10-13-2007, 06:47 PM
|
|||||
|
|||||
|
|
|
#609
10-13-2007, 07:07 PM
|
|||||
|
|||||
|
Thanks for the tip Michael, got it figured out pretty quick. Is there a link explaining how to wire up the dimmable ballast?
__________________
My Tank: 135G display, 45G Sump, 20G top off. 2 x 400 W, Bullet 1.5, Snapper Return, Profilux. ------------------------------------------------------------------------------------------------------ My Photo Website
|
|
#610
10-13-2007, 07:12 PM
|
|||||
|
|||||
|
Hi
In the bag with the EVG card there is a full pin in and out explanation, you will also find in this thread, I think from Canreef member AMP with some good info on this. As ever with any electrical wiring if you are unsure consult an electrician. Without seeing your set up it would be very unwise of me to advise remotely. I am sure you understand. If you still get stuck, call us on Monday and we can go through things better for you REgards Michael
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
