If you bought the maxi jet new and have the box, there is everything you need there to reduce it to the airline or 1/4" R/O type line.
The package has one 1/4 barb/barb fitting, this is inserted into the bowl shaped fitting (that has the rubber piece inserted in one end).
The end that had the rubber on it will insert into the grey coupler that goes on the end of the powerhead output.(the one with the venturi hole in it.) its a good snug fit. leave this unglued for cleaning.
The hole is plugged with the little cap(also supplied).
Marc.
__________________
Confucious say : Things that come to those who wait, will be things left over by those who didnt.
Last edited by SuperFudge; 05-22-2007 at 05:18 PM.
|
05-22-2007, 05:16 PM
Threaded Mode
