Securing feed and effluent lines for a calcium reactor

[andresont]

Secure with cable tie, make sure there is no metal just plastic in the lock.
Set slightly above water lewel to monitor flow/drip rate as it will slow down with time.

Originally Posted by trilinearmipmap

I am setting up a new calcium reactor.

I need to secure the water feed line and effluent line somehow in the sump. This reactor design draws water in without a feed pump. It uses the hard plastic water hose that fits John Guest speedfit fittings.

What is a good way to secure the water hoses in the sump?

Also should the output hose from the calcium reactor drip into the sump from a height, or be submerged in the water?