|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
02-13-2007, 06:37 PM
|
|||||
|
|||||
Jason,
Lots of people have been having trouble with this initial run of nanostreams. My 6025 has been fine, but many people have been having problems. Confirm that the impeller shaft is straight and not moving around (ie you can't pull it out). If not, go over to www.reefcentral.com and go to the Tunze forum. Ask the same question of Roger over there. He's a very helpful guy! If that doesn't work, you might need to return the pump and get a new one. I think the Canadian distributor is Proline Aquatics. And most importantly, good luck! Let us know how it goes.
__________________
50G reef + 20G sump 
|
|
#2
02-13-2007, 08:03 PM
|
|||||
|
|||||
|
Mine's also been fine but you might want to read this post.
http://www.aquariumpros.ca/forums/sh...ght=nanostream Sounds like you will have very little problem getting it replaced
__________________
Setup Mar 2004 50g tank 23g DIY Acrylic Sump\Refugium Sold Dec 2009  Vacation Fun: http://members.shaw.ca/cabin54/
|
|
#3
02-13-2007, 08:25 PM
|
||||
|
||||
|
turns out the metal shaft rusted and broke off.
so JL gave me a new one. they said only the first batch of these guys has that problem. Mike from JL said that the metal shaft shouldnt be comin off. when he pulled it ..it just came right off all rusted. all is well. thanks. Last edited by JasonJ; 02-13-2007 at 08:28 PM.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
