Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > FOWLR

Reply
 
Thread Tools Display Modes
  #1  
Old 01-22-2007, 08:18 PM
kevinpaz's Avatar
kevinpaz kevinpaz is offline
Member
 
Join Date: Jan 2007
Location: Calgary, AB, Canada
Posts: 25
kevinpaz is on a distinguished road
Default Filtration advice - new tank

I plan on setting up a 65 gallon tank with 65 lbs of live rock, a decent protein skimmer (sorry, forget the specs), and an eheim 2217. My concern is that the cannister filter will only cycle the tanks water 4.5 times per hour - I've heard that 10 times per hour should be minimum for a fish only setup.

In terms of stocking levels I'm not sure. I suppose I'm looking for advice in that category as well.

Any comments/advice welcome.

Thanks,

Kevin
Reply With Quote
  #2  
Old 01-22-2007, 08:38 PM
bassman bassman is offline
Member
 
Join Date: Aug 2006
Location: Quesnel, BC
Posts: 313
bassman is on a distinguished road
Default

Quote:
Originally Posted by kevinpaz View Post
I plan on setting up a 65 gallon tank with 65 lbs of live rock, a decent protein skimmer (sorry, forget the specs), and an eheim 2217. My concern is that the cannister filter will only cycle the tanks water 4.5 times per hour - I've heard that 10 times per hour should be minimum for a fish only setup.

In terms of stocking levels I'm not sure. I suppose I'm looking for advice in that category as well.

Any comments/advice welcome.

Thanks,

Kevin

I may be wrong here but I would think a sump tank would be a better investment than a cannister filter. Your live rock is going to act as your bio filter and your sump could have a filter sock in it to catch you debris (optional). You could then use a decent return pump to give you a higher turn over rate and better circulation. You will also be increasing your total water volume by adding a sump as well.

You should try to find the specs on the protein skimmer too so we can see if it will be large enough for your system. Most are over rated by the manufacturer.
__________________




230 mixed reef / 230 gal sump/fuge
Reply With Quote
  #3  
Old 01-22-2007, 08:52 PM
kevinpaz's Avatar
kevinpaz kevinpaz is offline
Member
 
Join Date: Jan 2007
Location: Calgary, AB, Canada
Posts: 25
kevinpaz is on a distinguished road
Default

I've used this tank in the past for freshwater so I already have the tank (not drilled) and the cannister filter. I know a sump would work best but unfortunately I don't have the $$$ to get a new tank atm.

For the protein skimmer I don't have one yet but will purchase one from my LFS when ready. I need a hang-off-back type.
Reply With Quote
  #4  
Old 01-22-2007, 08:53 PM
christyf5's Avatar
christyf5 christyf5 is offline
Staff
 
Join Date: Aug 2001
Location: Nanaimo
Posts: 9,175
christyf5 is on a distinguished road
Default

IMO, the rock will get the job done. The canister filter will have to be maintained with a fairly strict cleaning schedule as they are nitrate factories (although good for running carbon and water polishing on a short term basis).

Oh ya and Welcome to Canreef!
__________________
Christy's Reef Blog

My 180 Build

Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.

Last edited by christyf5; 01-22-2007 at 09:06 PM.
Reply With Quote
  #5  
Old 01-22-2007, 09:03 PM
muck's Avatar
muck muck is offline
Member
 
Join Date: Mar 2004
Location: Edmonton, AB (West)
Posts: 4,329
muck is on a distinguished road
Default

Welcome to Canreef Kevin!!
Reply With Quote
  #6  
Old 01-23-2007, 04:04 AM
Montana's Avatar
Montana Montana is offline
Member
 
Join Date: Dec 2005
Location: olds,alb
Posts: 66
Montana is on a distinguished road
Default

my first tank was run with can filter. took everything out and added only carbon. worked good. for water flow add some powerheads.
Reply With Quote
  #7  
Old 01-23-2007, 04:32 AM
Der_Iron_Chef's Avatar
Der_Iron_Chef Der_Iron_Chef is offline
Member
 
Join Date: Oct 2006
Location: Calgary
Posts: 2,188
Der_Iron_Chef is on a distinguished road
Send a message via MSN to Der_Iron_Chef
Default

Hey Kevin...welcome

First thing I recommend, especially since you mention you're on a budget, is to wait for things to sell here instead of going out and paying full price at a store. Skimmers and live rock pop up for sale here semi-regularly, so you just have to keep your eyes peeled!

Regarding the canister filter...I have been running one on my tank with only carbon and a phosphate-binding media (Rowaphos or Phosar). Recently I've disconnected it, though, because as Christy stated, it requires fairly strict maintenance/cleaning, and I wasn't able to do so. I'm looking into integrating a sump and am collecting the parts to do so slowly.

If I had to do it over again....or if I were you....I would just get the tank drilled right now while you don't have anything in it. I'm sure there are even people here in Calgary who would be willing to help you do that, etc., including the plumbing.

Anyway...keep researching and don't rush. And again, welcome!
__________________
~Drew

10G Nano * 10G Sump * Deltec MCE 600 Skimmer * JBL Viper 150w MH * Zeovit * Vortech MP40W

Millions long for immortality who do not know what to do with themselves on a rainy Sunday afternoon. ~S. Ertz



Reply With Quote
  #8  
Old 01-24-2007, 06:48 PM
Raf's Avatar
Raf Raf is offline
Member
 
Join Date: Jul 2005
Location: Upper Lonsdale, N.Van BC
Posts: 317
Raf is on a distinguished road
Send a message via MSN to Raf
Default

Yeah, the Eheims don't move a lot of water, but that is not what you need them for. Get some good powerheads for current and use the canister strictly as a mech/chem filter. As mentioned, make sure you service it frequently. Your LR will provide the bio filtration that you need.
__________________
Cheers

Raf & Diana

Our Reef Tank:

http://www.facebook.com/photo.php?pi...5&id=883435639

https://www.facebook.com/pages/Aquat...es/46469801680

Our Photos:
Nikon D7000 DSLR w Nikkor 2.8d 60mm micro lens amongst others
Reply With Quote
  #9  
Old 01-24-2007, 09:53 PM
kevinpaz's Avatar
kevinpaz kevinpaz is offline
Member
 
Join Date: Jan 2007
Location: Calgary, AB, Canada
Posts: 25
kevinpaz is on a distinguished road
Default

Thanks for the greets and advice.

I'm still unsure if I should setup this current tank without a sump or wait until I can purchase a 100+ gallon tank and maybe build a sump out of the 65 (if it will fit underneath).

Perhaps the best piece of advice is to be patient - unfortunately it's getting harder and harder every day to resist the quick win.
Reply With Quote
  #10  
Old 01-25-2007, 12:11 AM
kari kari is offline
Member
 
Join Date: Jan 2003
Location: Manitoulin Island
Posts: 663
kari is on a distinguished road
Default

Don't be too concerned with tank volume turn over rates but do look at flow rates/patterns within the tank as noted earlier.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 12:23 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.