|
|
|
#1
01-17-2007, 10:31 PM
|
||||
|
||||
Pump Question
Just picked that 90 gallon setup off chaloupa.(love it)
just had a question for you guyz it has duel overflows with 1" bulkheads so thats 600 gph per side right? if so im gonna want a pump that will do around 1200 gph at a 4ft head. Lemme know if im wrong here never set up a sump before. Just wondering what pump you guyz would recommend the tank is going to be in our living room dosn't have to be super quiet be a little bit would be nice. plan on adding duros in the overflows
__________________
55gallon fluval 404 sea clone 100 48"corallife light fixture 2 65w 10k 2 65w atinic 100lbs live rock(3-4" argonite sand 1 purple sabae anenome, bright purple tips 8" diameter 1 white/rosey long tentacle,bright white tips 4" diam 1 Fuzzy dwarf lion 1 black/yellow clown 1 false percula 1 coral beauty 1 yellow eye kole tang (baby) getting moved to 90soon 1 cleaner wrasse 1 brittle star, 1 sea cucumber,1 banded coral shrimp 
|
|
#2
01-17-2007, 11:22 PM
|
|||||
|
|||||
|
I picked up a Sedra 2000gph from Albert for around $200 and change. It's only been running for about a month. It's quite quiet. At night you can hear it but during the day you barely know it's running. Neil was over at my place and I think he has the mag 12 so he could give you a good comparison.
__________________
Equipment Red Sea Max Livestock Corals Purple Mushrooms, Kenya Trees, Fish/Inverts Brittle Starfish,,Long spine Urchin,Snails,Crabs, Snowflake Eel,Coral Beauty,
|
|
#4
01-18-2007, 11:58 PM
|
|||||
|
|||||
|
I'm pretty sure he meant durso.
__________________
~Drew 10G Nano * 10G Sump * Deltec MCE 600 Skimmer * JBL Viper 150w MH * Zeovit * Vortech MP40W Millions long for immortality who do not know what to do with themselves on a rainy Sunday afternoon. ~S. Ertz 
|
|
#5
01-19-2007, 12:35 AM
|
||||
|
||||
|
I've got a 90 with about 1100 GPH w/four foot head through the sump. I've been using a little giant sealed submersible fountain pump for a little over a year now. It has always worked great and there is no sign of wear whatsoever. It is made completely of ABS with absolutely no metal in contact with the water.
It's been great, and a steal at $110 bucks. Just have to have a syphon break on the pressure hose in case of power outage. Mike
__________________
This all started with a ten gallon and two clowns.
|
|
#6
01-19-2007, 01:04 PM
|
||||
|
||||
|
Sounds like you've worked out the GPH right. You don't want to go too low with the GPH, or the plumbing will want to suck too much air.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
