It all comes down to pounds per square foot that is being exerted on the floor....If its a wooden floor with the joists running parallel with the tank- you would be applying your weight over two joists...you might get some flex depending on where your main support walls are located.
I have a 180 upstairs that spans five 2x12 joists that run perpendicular to the length of the tank and the tank runs parallel to the support beam that is 4 ft away....my tank etc. weighs approx. 2300 lbs....the key is that the stand has solid wood over the entire bottom so the weight is evenly distributed (psf is spread over a 6x2 area) I would have more stress if my stand was on 4 or 6 legs. YOUR TANK IS OK..There is also no extra bracing or extra joists laid out for fridges,cabinets etc when houses are built, they are designed as a 'support system' for the entire structure.
__________________
180g tank(6x2x2) w/170lbs LR, 2-250W 1-400W Halides, 2-3ft t5 Actinics,H&S 1260 200 Skimmer, 1-Tunze 6000stream w/controller, 1-6060stream, 70g sump, 30g refugium Neptune controller, Sequence Hammerhead inline return, Lifeguard 25W UV, 1-Tunze osmolator, 1-Tunze wavebox, 1/4Hp Pacific Coast chiller, MarineTech calcium reactor
Last edited by Mike Olson; 12-30-2006 at 08:58 AM.
|
12-30-2006, 08:56 AM
Threaded Mode
