|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
12-14-2006, 05:06 AM
|
|||||
|
|||||
SW Mixer
Meanwhile, behind the scenes...I finally plumbed up the SW mixer tank. The only tricky part of doing this was to create rigid plumbing that could be disconnected in just the right parts to enable the mixer to be moved around on it's wheels.
One valve directs back into the mixer (for mixing)...the other directs SW into the 2nd sump.  
|
|
#2
12-14-2006, 06:05 AM
|
|||||
|
|||||
|
Look great Brad. Not sure what you could do to jazz up the upper section but I don't think you really need to. Hey you now I could have sold you a used Chemical mixer you didn't have to make your own. that is sweet you should sell the design.
Oh BTW I have a cheap router for sale I hear you may be looking for one LOL J
|
|
#4
12-17-2006, 04:02 PM
|
|||||
|
|||||
|
Now that the external construction is basically finished, I figured that it was safe to unwrap! That's a big improvement. Planned rockwork will hide most of the plumbing that you can see through the back wall of the tank.
 Last edited by untamed; 12-17-2006 at 04:12 PM.
|
|
#5
12-17-2006, 04:09 PM
|
|||||
|
|||||
|
I've done a little work on the sump. The skimmer is in place. I built a small acrylic shelf and set the Ca Reactor down on it. The sump shelf sits just above water line.
That's a PM622D reactor and G6 Skimmer. You can't see the 2nd stage of the reactor in the photo because it is hiding behind the skimmer. Basically...I'm killing time waiting for my lights to arrive. 
|
|
#7
12-17-2006, 05:33 PM
|
|||||
|
|||||
|
Everytime I look again at your pictures think it's going to fantastic with the front to back depth you have.
Know there's others out there but reminded of Fudge's or http://www.oregonreef.com/sub_aquascaping.htm .
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
