![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Yeah I guess it would be like a toilet lid.
![]() Speaking of lids he talks about a forced CSD where the top is sealed with an air vent with a check valve to build up pressure so you can use a bigger output pipe. But it's on a 100g reservoir with 4" pipe.
__________________
Brian ____________________________________________ 220g inwall 48"x36"x30" 110g mangrove refug/sump Poison Dart Frog Vivarium |
#2
|
|||||
|
|||||
![]() I was thinking of trying at least 1.5" to 2" for mine for maximum flush velocity. I hope that size will work.
Also, I was thinking of using a Maxijet 1200 to fill it up to the 3.5 gallon point. (approx 45 seconds)
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#3
|
|||||
|
|||||
![]() As long as it doesn't fill so quick that the siphon doesn't break at the end of the cycle. Then it just goes up and down without completely emptying or filling.
Again I have no experience with these, I'm just passing on the info.
__________________
Brian ____________________________________________ 220g inwall 48"x36"x30" 110g mangrove refug/sump Poison Dart Frog Vivarium |
![]() |
Thread Tools | |
Display Modes | |
|
|