![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() you might want to switch your lighting to the little coralife 18w hood they alow you to get some Antic lighting in there. Zoos look much better under 10000 K and antic lighting then under 6700 k lighting IMO... Or better yet Gut the Coralife hood and try to fit the bulbs + 6700k 23w bulb into your hood thats what i did on my 5 G nano and my zoos grew like crazy with good color.... and the fixture is $30 or so
|
#2
|
|||||
|
|||||
![]() Quote:
I think I might need to look at a DIY canopy before going that route, and I'm about as handy as a dead rat. Seriously. But seriously - what would be the easiest solution to attach the lights onto the inside of my current fixture, would it be wise to get a mini-ballast system and use that? Or I guess I could get the hood and add that AS WELL as what I've got - The hood is only 9" though, does it come w/ legs? |
#3
|
||||
|
||||
![]() Another nano reefer told me that the 18w Coralife (2x9 w each) units burn out too quickly. He said the actinic is dead after 3 months & the 10000k is not looking so bright either. The Coralife screw in CFL actinics worked ok for me a few years ago. I'll see if they carry them in the LFS & let you know.
|
#4
|
|||||
|
|||||
![]() The 10W and 20W Coralife 50/50 CFLs are still around. They work pretty good in nanos. Two 20W bulbs over a 5 gallon tank would work well. I have two over my 6 gallon nano, which is now my frag tank.
________ Old man nudist Last edited by Flusher; 04-21-2011 at 03:13 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|