|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
09-24-2006, 03:21 AM
|
|||||
|
|||||
or wait til i come up this week, and i can drill it for ya, if you have a dremel and the cutter i have the time to do it ...
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. 
|
|
#2
09-24-2006, 04:42 AM
|
|||||
|
|||||
|
Contact Rusty. He can drill holes for bulkheads from 1/2" to 2" with a diamond hole saw. I should know because he's using my bits!
   Also, I would personally go with the larger sized holes, that way you have an easier upgrade path in the future (i.e. get a bigger return pump) and the chances of the standpipe plugging are greatly reduced.
__________________
32"x32"x20" Cube-ish tank Last edited by mr_alberta; 09-24-2006 at 04:54 AM.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
