using Ozone

[andrewsk]

Sound like you are all sorted out. Pressurized reactors are 100% the way to go over using a skimmer. Make sure you filter your air line OUT through carbon as well.

Does your system come with an Air dryer?

Originally Posted by Pescador

Thanks for the info, I'll give it a while to break-in.

Also the readings vary depending on what the set point is at. The instructions say to take the readings with the set point cranked all the way up.
I get 165 with it cranked up and 48 with set point at the lowest. This is with the selector switch in the reading position. Does that make sense?

Also, after a ton of searching I finally found a reactor for pretty cheap.
It's 22 inches tall and it looks like it comes with same shredded plastic media as the MTC.

http://www.fishkeepers.net/pondconne....php?ID=204598

They are drop shipped from Aquarium Life Support Systems

They don't take Canadian credit cards, just cert. checks or money orders.

I'm going to run the output through a Phosban reactor filled with carbon.