need help starting my nano

[TheReefGeek]

I would setup a 5 or 10g sump with a small skimmer on it. The tank will really benefit from the additional water volume, and you can keep all your filters and heater hidden which in a small tank is really nice. Or depending on your tank locations, hook the 10g and 55g together with a common sump.

In a 10g with a sump I would do:

Clownfish x 2
Green or yellow clown goby
Cleaner shrimp
Snails
Couple hermits

Under 96w lights I would keep:

Feather duster
Toadstool
Xenia
Kenya tree
Zoos
Star Polyps
Mushrooms
Colt

If all goes well in a few months could try high up in the tank:
Frogspawn
Hammer
Torch
Plate
Candy cane

[niloc16]

thanks alot. i have a prizm that i just took off the 55g but i was given the sales pitch on it when i first started, and because i didnt do enough research on it. so i upgraded it to a remora aqua c. i was thinkin of using the prizm on the 10g but i didnt know if it was necessary. my plan was to get a coule percula's but i wanted some input first. now with the maxijet 600 should i get an adapter to go that rotates for wave motion or is directing it off the glass sufficient.

[TheReefGeek]

I would use 2 powerheads, and direct them upwards and towards each other. This will give more random flow, and break the surface tension of the water for you.

You can always put the prizm on if you need it. You can run it occasionally as well, because it is a bit unsightly.

[niloc16]

the prizm does look pretty bad on the back. thats a good idea for the orientation of the powerheads. currently i use maxijets on my 55g, would seio's be better in the nano or stick with some more maxijets. i find the maxijets quiet so im concerned about switching.

[TheReefGeek]

Seio's take up more room, so in a nano that should be a concern too.

I don't know about the noise factor for Seio's.

[dufferdan]

I agree with ReefGeek on on maxijets placement. I would use the skimmer, unless you plan on weekly water changes. (I would still use it regardless) I'm a big proponent of skimming, can't skim enough.
Cheers
Dan

[niloc16]

well i'll stick with my original plan of maxijets then. 2 X 600 model i think should do well. the penguin filter also puts off a nice current. hows the packing going dufferdan? i'm dying to set up the nano with the 96w but i gotta get some live rock first. tryin to convince the wife to go tonight. we'll see i guess

[niloc16]

i'm going with a pair of perulas, but if i was to add a firefish in the mix, is the tank large enough? for the 3