[quote=Beverly]fkshiu,
Interesting adaptation. Is this the surface skimmer you're talking about? How well does the skimmer work if there is quite a bit of surface scum? I wouldn't use Remora Pros on my 37g and 67g, only Remoras. Do you think the suface skimmer would fit the Maxi Jet 1200 that comes with these skimmers?
Yup. That's the one. I got it to fit on the Mag intake the following way: surface skimmer --> a bit of 1/2" ID hose left over from my Filstar canister --> NPT barb fitting screwed into the Mag intake. It took some time at the hardware store finding the little plumbing bits and pieces, but eventually I got the setup to work.
It probably won't fit on a Maxijet very easily, but upgrading the Remora to a Mag3 and the Remora Pro to a Mag5 is the recommended pump upgrade from AquaC itself. Going from the Maxijet to the Mag in my case showed a marked improvement in performance.
The surface scum is what you're after when you're skimming! That's the organics that the skimmer will pull out before they can break down into nitrate and phosphate. Since that stuff floats to the top like any oily substance in water, your skimmer's intake position should be near the top of the water for maximum efficiency.
04-02-2006, 06:47 AM
Threaded Mode
