|
|
|
#9
02-08-2006, 10:58 PM
|
|||||
|
|||||
The two most important tools to have are a router with a good flush trim bit and a table saw. For saw blades, there are special plastic cutting blades where the teeth on the blades are designed to reduce melting and provide cleaner cuts (i.e. less chipping). Usually they recommend 80 tooth blades for 1/8-3/8th thickness, 60 tooth blades for 3/8" and up.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
