![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Quote:
as for epsome salts, just but the reef advantage at 11 you won't need more than a Jar to get it to 1300 I guess. the reason is you are looking at it as a small amount so it should be ok, well every water change makes that amount bigger and unless some one can tell me exactly what they use for the additives than for Mg I will stick to the bought ones. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#2
|
|||||
|
|||||
![]() Thanks Steve,
I have already been through one jar and that got me to about 1200 ppm. So I guess I will go through another jar. I read a previous post where you said that your calcium reactor was able to maintain your Mg levels, so I will bump it to 1300 and see if I can maintain it as well with my reactor.
__________________
Brennan |
#3
|
|||||
|
|||||
![]() Brennan,
Kent salt may be slightly low in Mg, but it is more likely your corals have been using it, along with Ca, to grow, giving you such low Mg levels. I have never used epsom salts to raise Mg as it can seriously mess with the ionic balance of a system. Don't ask me to explain ionic balance, because I'm absolutely cr*ppy with chemistry details. That's why I use the chemistry calculator and read all those articles, half of which I don't really understand ![]() I would suggest using a commercial product or finding the chemistry article on ALL the DIY additives and go from there. Personally, I think it's just easier to use a commercial Mg product than try to figure out the DIY stuff. JMHO. |
#4
|
|||||
|
|||||
![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#5
|
|||||
|
|||||
![]() Rick
I bought 11 lbs of this http://www.canreef.com/vbulletin/showthread.php?t=16549 from LittlesilverMax in November 2005 and I have just finished using it up!!! Bev is gonna be so proud of me ![]() http://www.canreef.com/vbulletin/showthread.php?t=22279 refers Another friend used the Salifert product in a bottle and after dumping in the entire bottle, it raised their mg level by about 75 ppm!!! I don't know who is crazier - me or this hobby? Its gonna be pricey to maintain mg levels in a high demand sps tank. Imagine 11 lbs of mg into my system in three months ![]() Like another one of my feeble group buy attempts, I tried to get a large shipment out here to cut down/split on the shipping costs.... i think i'm just gonna give up on group buys from herein ![]()
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#6
|
|||||
|
|||||
![]() Well i added another half jar today, will test and add the other half tomorrow. I am thinking that if my reactor can't keep up with the Mg levels then so be it, I'm not dumping anymore 11$ jars in. My corals grew fast before I added the Mg....
__________________
Brennan |
#7
|
|||||
|
|||||
![]() I have also heard of people using - I think - dolomite stones - Steve help- in their Calcium Reactor to maintain Mg. I have quite a few SPS corals in both my large aquariums and don't really have to fiddle with it that much and when I do I use the Seachem.
You may want to consider switching salts if that is an option - it might be cheaper in the long run. ![]() |
#8
|
|||||
|
|||||
![]() Hey, Brennan I just found two jars of seachem reef advantage magnesium sitting here if you want them. I don't know when I'm coming down to Duncan though. You coming to Nanaimo anytime soon?
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
![]() |
Thread Tools | |
Display Modes | |
|
|