I forgot to mention it's very sensitivity at these early stages. Making a slight turn with either the red dial or the valve will make this thing go crazy. Try really small turns. Make sure you don't have anything blocking either the air silencer or the output tubing vent. Check to make sure that the red dial is pointing directly to the output tubing. Not at 90 degrees to it. This is the lowest setting. Also, check to make sure that the air hose from the air silencer that feeds into the pump is securely attached. If there is not enough air getting into the pump it will be pushing more water, which will cause more overflowing.
|
06-29-2005, 04:12 AM
Threaded Mode
