![]() |
#1
|
|||||
|
|||||
![]() Is there such a formula to convert Lumens to Kelvin?...I have seen lots of lights and bulbs out there that list Lumens.....Just curious
![]()
__________________
Murray I reserve the right to hijack any thread I want to!! My carbon footprint is bigger than your carbon footprint !!!! |
#2
|
|||||
|
|||||
![]() I think they are compleatly differnt things, kalvin is the temp of the bulb produces the colour of the light. A lumen is a way of measuring how much light gets to what you want to light. I know a higher kalvin penetrates deeper into the water so maybe there is some realationship but im not sure about conversion.
__________________
Sean ![]() Back in the good ole days ![]() |
#3
|
|||||
|
|||||
![]() The short answer to your question is NO. Sean you are partly right, but mostly wrong.
![]()
__________________
Bob ----------------------------------------------------- To be loved you have to be nice to people every day - To be hated you don't have to do squat. ---------Homer Simpson-------- |
#4
|
|||||
|
|||||
![]() So, what parts am i wrong on?
__________________
Sean ![]() Back in the good ole days ![]() |
#5
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#6
|
|||||
|
|||||
![]() Steve, Can you provide a thread for us to read about this. Apparently I had some misconceptions as well.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#7
|
|||||
|
|||||
![]() If you guys check out some old Aquarium Frontier issues or perhaps,
www.advancedaquarist.com and look for lighting articles by Craig Bingham, Dana Riddle or Sanjay Joshi. Everything your looking for.
__________________
Doug |
#8
|
|||||
|
|||||
![]() Quote:
OK I screwed Lumen and LUX up again ![]() a Lux is lumen/meter^2 a lumen is the direct measurement of light power, or "A unit of light flow or luminous flux. The lumen rating of a lamp is a measure of the total light output of the lamp. The most common measurement of light output" for further info the Lumen is a rating for for which the standard is light of 555 nm wave length only. So in simple terms, a lumen is a instantaneous reading of the intensity of light at a 555 nm wave length. as for Kelvin, it is a direct relationship between the temperature of a black body object (a lot of metals behave like a true black body) and the color it emits due to its temperature. like when you heat up a chunk of metal with a torch, it goes through color changes that correspond with the temperature it is at and the temperature is measured in Kelvin not Celsius or Fahrenheit. here is a page to play with to see how it works. http://cat.sckans.edu/physics/black_body.htm Steve
__________________
![]() Some strive to be perfect.... I just strive. |
![]() |
Thread Tools | |
Display Modes | |
|
|