Aquascape Sharing RSM c250

[Dresden]

I kept changing between version A and B so many times that a few pieces came apart suddenly.

The good news was that I was able to improve it further after the accident. I added a bunch of small caves, nooks and tunnels. I strive for healthy bio diversity with copepods and bristleworms. I also lost one leg of the structure on the left but is stable without it. Rather than reattach it I figured this should allow room for additional islands.

I really like Zoa, GSP, Xenia ect and this will be mostly a softie and LPS tank so islands will likely be a big help. I will need to get the islands higher up off the sand because the sand sifting goby is relentless.

Updated 3D Capture:
https://skfb.ly/6YKnK

Updated Photos:
Front - https://photos.app.goo.gl/rTM6qH7eVF9mijuZ8
Right Side - https://photos.app.goo.gl/XsZVTnP6pwKH1YvB6
Left Side - https://photos.app.goo.gl/ifb5vZNctAcLCchN9


I suspect it will take about 4 - 6 more weeks before I can get the RSM c250 moved and setup upstairs. To keep things moving I just setup a 30g downstairs and the rock is soaking now with a pump for a few days. I'll replace most of the water every day for 2-3 days. I'll then add the salt water and start the rock cycling.

Picked up some Fritz PRO - Ammonium Chloride and Brightwell Aquatics MicroBacter7

Thanks for the support and advice!