FS: Tanks, Stands, Sumps, Lights, Pumps, Powerheads, Heaters, Thermometers - Burnaby

[gregzz4]

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 2 available

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 3 available

Floating thermometer free w/$10.00 purchase 2 available

[gregzz4]

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available

[gregzz4]

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available

[gregzz4]

This is the most up-to-date-info
See first post for more info

Please PM your #

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available

[gregzz4]

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available

[gregzz4]

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00 PENDING

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00 PENDING
100watt used in mixing tank $15.00 PENDING
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available

[gregzz4]

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 SOLD

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line SOLD
100watt used in mixing tank SOLD
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available