This seem like a good Tank?

[Sasq40]

Originally Posted by Dearth

Buy new bulkheads don’t reuse the ones that came with the tank and clean your tank out using a vinegar/water combo

Scrape the glass with a razor

Check the silicone beads thoroughly

Plug the bulkheads fill with water check for leaks

If ok drain and setup your tank as you like

Well, i found a local tank builder surprisingly and he can replace the front glass fairly cheap and drill out the back for me/What's going to be my best setup for an overflow system?

[Dearth]

Originally Posted by Sasq40

Well, i found a local tank builder surprisingly and he can replace the front glass fairly cheap and drill out the back for me/What's going to be my best setup for an overflow system?

I’m not the best person to ask about this as my experience is limited to built in overflows there should be someone here who can better answer that than me.

[Sasq40]

what are peoples thoughts to having the bottom drilled and doing a bean animal center overflow with the current holes as returns?

[smokinreefer]

do you mean you want to silicone in an overflow box in the center and have the drain holes added to the bottom for your herbie?

yeah, thats a good plan. but then i would just plug the current holes up and do an over the top dual returns.

or you mean just drill holes and have standpipes as your herbie?
and then run standpipes up from the current holes as your returns?

short answer, No. I wouldnt do it that way.
i prefer to have as little holes on bottom due to paranoia of leaks.
if the hole is on bottom and it leaks, potentially whole tank drains.