Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #16  
Old 01-10-2019, 03:28 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

If you really want a sump in the garage, a 1' drop and 8' away means you'll need about an 8" drop. More is better. 1/8" per foot is close to code but I prefer to go overkill.
The bottom of your drains need to be, in this case, at least 8" higher than your planned sump. If you can, put your tank on a taller stand.
I was having flow issues with my old setup. In my case, my drain pipes were too small @ 1"
My bulkheads used to be 30" from the floor and now are 40".
I run at least 6' long and use 1-1/2" pipe. Everything has been great for nearly 3 years now.

As for your structural stuff, if you're going to put footings down in the soil, you'll need to dig down at a minimum of 24". 12" is for the footing and another 12" is to clear the frost line. In my opinion it's not worth it. Don't use jacks without a proper concrete footing. It will fail with frost heave if you don't dig it down and pour a proper bed.
Sistering the joists is a good enough plan as you won't get much deflection without them, so I don't see much floor movement once you add material.
Ensure you sister properly. Both sides of each joist need material, and go 100% past your required area.
Use glue and decent screws and leave it alone for a few days to dry.
I'll bet sistering is all you need.

Good luck !!

Last edited by gregzz4; 01-10-2019 at 03:31 AM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 05:29 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.