Moving houses, need opinions on floor bracing

[Scythanith]

Best you could hope for is to add a gate valve to the drain and get it pulling a siphon.

[WarDog]

Could you post a picture of the 2 joists and 2 beams in question? I have a feeling you might be good with just sistering the 2 joists and adding some blocking.

[Sasq40]

Originally Posted by WarDog

Could you post a picture of the 2 joists and 2 beams in question? I have a feeling you might be good with just sistering the 2 joists and adding some blocking.

What's everyone using for posting photos now, I used to use Photobucket but last time I tried posting pics it was paid only. Been a while lol

My current plan is to just get 2 telepost on sidewalk blocks under the joist that the front of the fish tank is on. Joist are 2x10 and roughly 14 ft long

[WarDog]

Originally Posted by Sasq40

What's everyone using for posting photos now, I used to use Photobucket but last time I tried posting pics it was paid only. Been a while lol

My current plan is to just get 2 telepost on sidewalk blocks under the joist that the front of the fish tank is on. Joist are 2x10 and roughly 14 ft long

I use Flikr. It's free for up to 1000 photos.

If by 'sidewalk blocks', you mean some type of concrete paver, I wouldn't use that. It will shatter. Instead, place your jacks on top of some wood. It will absorb and distribute weight more evenly. A couple of 2 x 10's @ 12 - 24 inches under each jack will absorb and distribute weight more evenly. A few nails to secure the jacks will also help with any future shear stresses.

[Sasq40]

Originally Posted by WarDog

I use Flikr. It's free for up to 1000 photos.

If by 'sidewalk blocks', you mean some type of concrete paver, I wouldn't use that. It will shatter. Instead, place your jacks on top of some wood. It will absorb and distribute weight more evenly.

I'll post the photo I got from when I was at the house last. The only reason I say side walk block is to just get the wood off the dirt, but now I'm thinking sistering the 2 joist under the tank, maybe a few after, using something like a 4x4 concrete base with a 4x4 and one of those threaded elevated post braces to get it nice and snug

[WarDog]

Originally Posted by Sasq40

I'll post the photo I got from when I was at the house last. The only reason I say side walk block is to just get the wood off the dirt, but now I'm thinking sistering the 2 joist under the tank, maybe a few after, using something like a 4x4 concrete base with a 4x4 and one of those threaded elevated post braces to get it nice and snug

IMHO concrete is overkill, and costly. A wood base under the jacks is plenty. You can always place some vapor barrier between the wood and soil.

[Sasq40]

Originally Posted by WarDog

IMHO concrete is overkill, and costly. A wood base under the jacks is plenty. You can always place some vapor barrier between the wood and soil.

I auctally have a few concrete desk posts that I had from a pergola thing I built but took down to move to the new place, so I already have the concrete and 4x4 to make posts. I auctally sent a email to Kevin @ African-cichlid.com and have based my current plan on his suggestions, with some tweaks using material I have on had.

What my current plan is to make another 2x10 beam that will span the center of the room, with 4x4s on cement post bases with a adjustable base on top to make sure my new beam is nice and tight. once this is done I need to move onto the sump system. I plan to run either sumpless till I finish the new setup or my current sump setup if I can save the plumbing.

My goal here is to have as silent of a tank as possible as this will be in our living room

I'm thinking of during a bean animal with pipes coming from behind and use my current corner overflows as the drains. Am I correct in assuming as long as my sump is lower then my lowest drain in will drain?

Next question is what should I use as a sump? I'd prefer to use something that can be closed up as my current plan is to stick it in the corner of my garage, which I use for wood and metal projects so there is often dirt in the air. Another option is for me to build a small room in the garage corner thst will contain the sump equipment. Then I guess I need to figure out what kind of hose / pipe setup will be best