![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#2
|
|||||
|
|||||
![]() I had problems with my Vertex Puratek... after a bunch of troubleshooting it was determined to be my pressure switch.
__________________
300g Basement Reef - April 2018 |
#3
|
||||
|
||||
![]() It is the ASO, i have replaced all the other fittings for this. I opened up teh ASO to clean it out but no luck. It will shut off for about 5 seconds then it will start making a squeak and then the drain will blast for 10 seconds and repeat.
|
#4
|
||||
|
||||
![]() I removed mine, I used electric solenoids to shut water off to my RO, runs via my APEX, plus it auto flushes membranes!
![]()
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors |
![]() |
Thread Tools | |
Display Modes | |
|
|