Weld-on 40

[straightrazorguy]

Hi guys, I have a problem with my Vertex reactor: I need to glue PVC to acrylic. I posted another thread with the details, and I found out the best product for the job is Weld-on 40. The problem is that by the time I source some, I will be without a reactor for a while....

Does anybody in the Lower Mainland have any Weld-on 40? I need a tiny amount and I'm willing to drive, and, obviously pay...

[spit.fire]

Originally Posted by straightrazorguy

Hi guys, I have a problem with my Vertex reactor: I need to glue PVC to acrylic. I posted another thread with the details, and I found out the best product for the job is Weld-on 40. The problem is that by the time I source some, I will be without a reactor for a while....

Does anybody in the Lower Mainland have any Weld-on 40? I need a tiny amount and I'm willing to drive, and, obviously pay...

Are you running the reactor outside of the sump?

[Default]

Industrial plastics in richmond sells weld on. I've used #4052 to bond acrylic to abs and pvc before if you want something thicker #10 works great.

The following places should sell it too

CAN BC BURNABY 13060
E M PLASTIC & ELECTRIC 6990 GREENWOOD ST. V5A 1X8 604-420-5000 LTF

CAN BC BURNABY 23258
EAST WEST PLASTIC & ELECTRIC 103-105 6741 CARIBOO RD. V3N 4A3 604-420-8900 LTF

CAN BC COQUITLAM 5344
SABIC POLYMERSHAPES UNIT #104 11 BURBRIDGE ST. V3K 7B2 604-468-2112 LTF

CAN BC SURREY 37563
LAIRD PLASTICS Unit #200 - 19670 92A Avenue V1M 3B2 604-888-8332 LCA

CAN BC NEW WESTMINSTER 4584
ACRYLCO MFG. LTD. 711 DERWENT WAY, ANNAIS ISL. V3M 5P9 604-524-9441 LTF

[straightrazorguy]

Originally Posted by spit.fire

Are you running the reactor outside of the sump?

Yes, outside. Besides, this pipe is the just below the intake to the recirculating pump, so it needs to me water-tight....

[straightrazorguy]

[quote=Default;1023039]Industrial plastics in richmond sells weld on. I've used #4052 to bond acrylic to abs and pvc before if you want something thicker #10 works great.

/QUOTE]

Thanks Default; I will get some tomorrow.

[straightrazorguy]

So, I got a pint of the stuff; thanks Default! I used one one-hundredth of the volume for my joint, and now I am stuck with the rest. So, should any of you Canreef folks want some, please PM me.