Reactor blow out

[Ya Dude]

I do have the input T'd off sump pump with needle valve. The needle valve was adjusted with the out put fully open with barely any effluent pressure.
I can tell the reactor over reacted because of the silty water left behind which would explain excessive co2
I ll start by ordering a new probe and fix the reactor I guess.
Luckily I have a kalk dripper

[Delphinus]

I tried once using a 60ml/min peristaltic pump to feed the reactor. Thought I had the feed problem licked once and for all until I learned that those pumps apparently don't last more than a couple months when being used for more than a couple minutes per day to dose something. Can't win!!