RO/DI Booster Pump

[elitesurfer]

Hi guys,
I've had to change my water change station and the water pressure coming off my faucet is currently around 20 psi... I'd like to add a booster pump to the system (BRS 4-stage RO/DI 75 gpd)

If any of you use booster pumps, could you share some experience on them. Atm, I'm considering getting this vertex pump from J&L.
http://www.jlaquatics.com/vertex-boo...sis-units.html

Thanks

[kyl]

I bought an Aquatec 8800 (#8841-2J03-B421) since the PRV is off-limits, and it's increased from ~40 from the tap to ~90PSI. Quite a big difference in water generation, but I run a 150gpd unit with two RO cartridges.

[elitesurfer]

Originally Posted by kyl

I bought an Aquatec 8800 (#8841-2J03-B421) since the PRV is off-limits, and it's increased from ~40 from the tap to ~90PSI. Quite a big difference in water generation, but I run a 150gpd unit with two RO cartridges.

That's quite a nice boost. I'd be happy to get to 60 psi range. Not sure if vertex one will cut it.. Looks like I could order Aquatec one from amazon though.

[dino]

are you running from a faucet to the rodi? this might explain your low pressure

[elitesurfer]

Originally Posted by dino

are you running from a faucet to the rodi? this might explain your low pressure

Yes I am. Thing is my kitchen faucet is around 30-35 psi but the faucet in my laundry room is extremely low...

[kyl]

Originally Posted by elitesurfer

That's quite a nice boost. I'd be happy to get to 60 psi range. Not sure if vertex one will cut it.. Looks like I could order Aquatec one from amazon though.

I could not find that exact model in stock (same one BRS sells in their kit) except through a place back east. Their delivery and CS was awful though, so if you can find it through something like amazon I'd definitely go that route. Any waterworks supplier should be able to order in.

Not sure what the OEM is for the Vertex, but I know Aquatec has been around forever and pumps / flow control is all they do, so that factored into my decision.

[elitesurfer]

Originally Posted by kyl

I could not find that exact model in stock (same one BRS sells in their kit) except through a place back east. Their delivery and CS was awful though, so if you can find it through something like amazon I'd definitely go that route. Any waterworks supplier should be able to order in.

Not sure what the OEM is for the Vertex, but I know Aquatec has been around forever and pumps / flow control is all they do, so that factored into my decision.

Awesome. Thanks for sharing your experience.