![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() After over 5 years without issues, today, when I went to refill my DI canisters (I have 3), I noticed they were all expanded inside the holder. One (the first in the series) was actually burst inside the holder with DI resin spilled out. I cant get the other 2 out of the holder and will likely have to break the canisters apart to use the RODI unit again.
Has anyone ever had this issue or any ideas of how this happened? |
#2
|
|||||
|
|||||
![]() Post some pics?
|
#3
|
|||||
|
|||||
![]() |
#4
|
|||||
|
|||||
![]() Yikes! I haven't saw this happen before. Makes me wonder if I should be unscrewing my clear filter canisters at least once a year.
__________________
300g Basement Reef - April 2018 |
#5
|
|||||
|
|||||
![]() I've had the RODI unit for over 5 yrs, but I change out/refill often. Last time was about 4 months ago.
I cant figure out why the DI resin canisters are looking like they expanded. I'll have to cut the other two out and put new canisters which I just ordered from J and L. I'd just like to know what happened... makes no sense to me. ![]() ![]() |
#6
|
|||||
|
|||||
![]() Any chance they started freezing?
I'm gonna guess not, but that's all I can come up with...
__________________
- S H A O - |
#7
|
|||||
|
|||||
![]() Did you pack them too tight? The resin does expand a little bit... But that seems quite extreme! It does look like they froze, but why no damage anywhere else?
|
#8
|
|||||
|
|||||
![]() ^^^ this..
This happened to me, only all of my canisters blew up right at the threads.
__________________
![]() They call it addiction for a reason... |
#9
|
||||
|
||||
![]() Any chance it is water pressure?
Charles
__________________
Where did my rum go?! Success in this hobby does not count how you spend your money, it counts how you spend your time. |
#10
|
|||||
|
|||||
![]() Can't be water pressure or freezing. Either of these would cause the canister to break, not the cartridge.
Mindy may have something about the resin expanding, and if it's packed too tightly will burst the cartridge. Sorry Steve, can't help ya. I looked all over the web with numerous different search params and found nothing. Looks like you're the lucky 'first' one to have this happen. I'd be curious to see what the guys @ BRS might say about this ... |
![]() |
Thread Tools | |
Display Modes | |
|
|