Scott's 135 gallon display tank build

[patman]

You may be having the problem because of your profile PF1 and PF2 setting. First, you changed the name for both of these to "wave" which may be confusing the system. Next you have them set to Vortech programs. I think you either need pump or ramp. The two quotes below are from the neptune forums.


"ON and OFF are manual overrides. ON is ON/100%, period. There's nothing wrong. Programming will only be executed if the outlet is set to Auto.

VarSpd outlet put of a variable 0-10 volt) control signal - they are used with compatible dimmable lighting and variable speed pumps like the controllable Tunze pumps. You cannot use Vortech profiles and modes with VarSpd outlets.. That simply won't work. You can use pump and ramp profiles with them."

"The 4 VarSpd outlets by default come pre- programmed with Set PF1 for VarSpd2, Set PF2 for VarSpd2, etc. When you renamed the PF2 profile to ReefCrest, for example, the programming for VarSpd2 changed to Set ReefCrest."