Programming return pump on my Apex controller

[whatcaneyedo]

I desire mine to do most of the same things as yours. I've used some different language and it works without issue.

Set ON
Min Time 006:00 Then OFF (keeps the pump from turning back on for 6 minutes if one of the switches shuts if off)
If Sw5 OPEN Then OFF (upper water level limit switch so that the tank doesn't overflow if the 'overflow' becomes blocked)
If Sw3 CLOSED Then OFF (This is a water on the floor sensor)

I think your feed program is wrong. If I wanted to use that feature to shut my return pump off for 6 minutes I would say this:

If FeedD 006 Then OFF