Wp25 wavemaker pumps on an Apex controller

[BlondNasoTang]

Here is my code for anyone who might be interested.

Pump
Set Wave2
If Time 08:00 to 10:59 Then Wave1
If Time 11:00 to 14:00 Then Wave2
If Time 14:01 to 21:30 Then Wave1
If Time 21:31 to 07:59 Then night1
If Outlet Timer1 = ON Then Surge1
If Outlet Timer2 = ON Then Wave1
If Outlet Timer3 = ON Then Wave2
If FeedA 002 Then Feed

Profiles
Wave1
Synchronize Enabled Disabled
Divide by 10 Enabled Disabled
Initial off time (Seconds) 0
On time (Seconds) 3
Off time (Seconds) 6
Minimum intensity 20
Maximum intensity 50

Wave2

Synchronize Enabled Disabled
Divide by 10 Enabled Disabled
Initial off time (Seconds) 0
On time (Seconds) 3
Off time (Seconds) 6
Minimum intensity 20
Maximum intensity 100

Surge1

Ramp time (minutes) 2
Start intensity 0
End intensity 100

Night1
Synchronize Enabled Disabled
Divide by 10 Enabled Disabled
Initial off time (Seconds) 0
On time (Seconds) 6
Off time (Seconds) 8
Minimum intensity 20
Maximum intensity 40

Feed

Ramp time (minutes) 5
Start intensity 20
End intensity 50

Virtual outlets

Timer1
OSC 120:00/003:00/000:00 Then ON
If Outlet Timer2 = ON Then OFF
If Time 21:30 to 08:00 Then OFF
If FeedA 000 Then OFF

Timer2
OSC 045:00/015:00/000:00 Then ON
If Outlet Timer3 = ON Then OFF
If Time 21:30 to 08:00 Then OFF
If FeedA 000 Then OFF

Timer3
OSC 015:00/005:00/000:00 Then ON
If Outlet Timer1 = ON Then OFF
If Time 21:30 to 08:00 Then OFF
If FeedA 000 Then OFF